1* Adjustable Embroidery Stand Wooden Embroidery Hoop Stand Cross Stitch Holder Portable Frame Rack DIY Sewing

<p>Description</p> <p>This tabletop embroidery stand is an artisanal companion, customized for the dream weaver. It skillfully blends elegance and practicality, with a stable stand to support the gentle pouring of each stitch. The lightweight design fits easily into any corner, whether it's delicate embroidery or magnificent brocade, it can be as stable as a rock, allowing creativity to flow freely, making every handmade moment a pleasure, and letting traditional craftsmanship blossom into a new color in modern life.</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>Details&nbsp;</p> <p>Smooth Edge:&nbsp;The rounded and smooth edge not only increases the beauty of the product but also improves the safety of use.</p> <p>&nbsp;</p> <p>Practical Slot:&nbsp;The slot on the clip is specially designed for embroidery hoop screws, which is both beautiful and convenient, and also ensures firm clamping.</p> <p>&nbsp;</p> <p>Thoughtful Pads: 3 silicone pads increase the friction with the table surface, so you can rest assured that it will not tip or slide easily on any flat surface.</p> <p>&nbsp;</p> <p>Application</p> <p>It is widely used in cross stitch, needlepoint, embroidery, needlework, punching needles, and so on. It is suitable for round, square, and oval embroidery hoops less than 29cm/11.42 inches in diameter.</p> <p>&nbsp;</p> <p>How to Install</p> <p>1.&nbsp;Take out the riser and base, then use 0.98-inch screws to fix the riser to both sides of the base.</p> <p>2.&nbsp;Attach the clip with screws to the top position of the riser.</p> <p>3.&nbsp;Secure the clips to the riser bar by screwing them in place with the screw caps.</p> <p>4.&nbsp;Place the bottom clip under the top clip. Then use the screw cap with screws to fix the top and bottom clips. (You can adjust the spacing between the top and bottom according to the thickness of the embroidery bandage.)</p> <p>5.&nbsp;Snap the spacer into the slot at the top of the upright, then attach the clip with screw to the top position of the upright and secure it with the screw cap.</p> <p>6.&nbsp;Install the drawing cleat. Snap the drawing cleat into the drawing cleat spacer and secure it with screws.</p> <p>7.&nbsp;Installation is complete.</p> <p>&nbsp;</p> <p>Specification</p> <p>Color: Original Wooden</p> <p>Style: Modern</p> <p>Material: Beech</p> <p>Process: Polishing, Grinding</p> <p>Assembly Required: Yes</p> <p>Mounting Type: Tabletop</p> <p>Applicable Embroidery Hoop Width: Within 29cm/11.42in</p> <p>Applicable Embroidery Hoop Thickness: 0-2.5cm/ 0-0.98in</p> <p>Adjustable Spacing Range: 13-37cm/5.12-14.57in</p> <p>Product Size: 44*12*22cm/17.32*4.72*8.66in</p> <p>Package Size: 30*16*7cm/11.81*6.3*2.76in</p> <p>Gross Weight: 1.3kg/2.87lbs</p> <p>Net Weight: 1.1kg/2.43lbs</p> <p>&nbsp;</p> <p>Package Included</p> <p>1* Adjustable Embroidery Stand</p> <p>All Accessories for Use</p> <p>&nbsp;</p> <p>Notes&nbsp;</p> <p>1.&nbsp;Please check the style and size before purchasing.</p> <p>2.&nbsp;Please note that embroidery cloth and threads are not included.</p>